Setup vpn mikrotik client windows#
I know it offer less security, but for some reason I could not force Microsoft Windows to work on L2TP via aes-256.ĬLI /ip ipsec peer add address=0.0.0.0/0 port=500 auth-method=pre-shared-key secret="MYKEY" generate-policy=port-override exchange-mode=main-l2tp If this is the case, be sure to stay with 3des. You cannot add multiple algorithms (like 3des and aes-256 above). In version previous than 6.xx, you can pick only one encryption algorithm, if I remember correctly. In case that you already have some IPsec configuration which is already working and using the default configuration we don’t want to mess with that.ĬLI /ip ipsec proposal add name=L2TP-Proposal auth-algorithms=sha1 enc-algorithms=3des,aes-256-cbc pfs-group=none On IPsec configuration, you can use the default configuration (like Proposals) but I would suggest to let those as default and add your new ones. PPP > Interface > L2TP Server Enabled: CheckedĬLI /interface l2tp-server server set authentication=mschap2 default-profile=l2tp-profile enabled=yes ipsec-secret=MYKEY max-mru=1460 max-mtu=1460 use-ipsec=yesĬLI /ppp secret add name=MYUSER password=MYPASSWORD service=l2tp profile=l2tp-profile IPsec Configuration The rest of values can be left on default value.ĬLI /ppp profile add name=l2tp-profile local-address=L2TP-Pool remote-address=L2TP-Pool use-encryption=required change-tcp-mss=yes dns-server=8.8.8.8
We can use also the default one, but I don’t like to mix things. It’s not mandatory if you already have a IP Pool, but I assume you don’t and we need to add one.ĬLI /ip pool add name="L2TP-Pool" ranges=172.31.86.1-172.31.86.14 L2TP Configurationīefore adding a new L2TP Server, we need to add a new L2TP Profile. In earlier versions some configurations are a bit different, but you’ll figure it out as I will explain where is really important. You can check my article on IPsec VPN Mikrotik to Cisco for firewall configuration.Īnother important part is that I’m using RouterOS v6.24 in the below scenario. I know this is not exactly in the line of this blog oriented on enterprise networks, but it’s network technology in the end so I’ll try to cover it here.īefore we start, please make sure that your Mikrotik build-in firewall is configured in such way that it can accept packets on the WAN interface.
Setup vpn mikrotik client how to#
I got some questions about how to configure Mikrotik to act as L2TP Server with IPsec encryption for mobile clients.
0 kommentar(er)
